Sign Materials: Which Board to Use for Every Sign
Free Shipping @ $149 Free Local Pickup Also Available
Follow Us On

Sign Materials: Which Board to Use for Every Sign

The right sign material comes down to four questions: is the sign indoors or outdoors, how long does it need to last, is it lit from behind, and how will it be mounted? This guide matches each common sign job to the board that suits it, then covers each material: corrugated plastic, aluminum, ACM, AlumaCorr, acrylic, polycarbonate, PVC, styrene, magnetic sheet and vinyl banner.

Quick Pick: Sign Material by Job

Sign jobBest materialWhy
Yard signs, election signs, event signsCorrugated plasticLight, weatherproof and the lowest cost; takes H-stakes
Real estate, parking and directional signsAluminum blanksRigid and built to last outdoors for years
Wall signs and large flat panelsACMVery flat and lighter than solid aluminum
Lightweight rigid outdoor panelsAlumaCorrAluminum faces over a fluted core, the lightest metal-faced option
Illuminated faces and lightboxesAcrylicWhite 7328 spreads LED light evenly
Signs that may get hit or vandalizedPolycarbonateTakes impact where acrylic might crack
Indoor displays and dimensional lettersPVC foam boardLight, rigid and routes cleanly
Low-cost indoor panels and POPStyreneThin, cheap and easy to cut
Car magnets and removable signsMagnetic sheetSticks to steel and comes off cleanly
Storefront and event bannersVinyl bannerFlexible, hangs anywhere, rolls up for storage

Four Questions to Ask Before You Pick

  • Indoors or outdoors? PVC and styrene are indoor materials. Aluminum, ACM, AlumaCorr and polycarbonate are built for outdoor work.
  • How long does it need to last? A campaign sign needs a few months; a parking sign needs years. Corrugated plastic lasts about 2 to 3 years outdoors. ACM lasts about 7 to 10 years. Aluminum and ACM are the long-term choices.
  • Is it illuminated? Backlit faces need a material that passes light evenly, which means acrylic or polycarbonate.
  • How will it be mounted? Staked in the ground, framed, post-mounted, wall-mounted or hung. Stakes need fluted corrugated plastic; posts and walls call for a rigid panel.

Corrugated Plastic (Coroplast)

Fluted polypropylene sheet, usually 4mm, and the standard for yard signs, real estate riders, election signs and event signs. It is weatherproof, UV resistant and lasts about 2 to 3 years outdoors. The flutes take wire H-stakes. Buy pre-cut 18x24 corrugated plastic blanks for standard runs, or full 4x8 sheets, which yield 10 18x24 blanks each, to cut your own sizes. Our yard sign sizes guide covers the common sizes.

Aluminum

Pre-painted aluminum is the premium choice for flat outdoor signs that need to last: parking, regulatory, directional, facility and long-term real estate signs. It comes painted from the factory, ready for vinyl or direct print. .040 is the standard gauge for most signs, .063 adds rigidity for larger and post-mounted signs, and .080 is the heaviest. Buy pre-cut aluminum sign blanks from 6"x24" to 24"x36", or 4x8 and 4x10 aluminum sheets that we shear to size in-house. For signs that must show up at night, add reflective vinyl.

ACM (Aluminum Composite Material)

Two thin aluminum faces bonded to a solid polyethylene core. ACM stays very flat, holds up outdoors and weighs far less than solid aluminum of the same thickness, which makes it the shop standard for wall signs, large flat panels and fabricated signs. ACM sheets come in 4x8, 4x10 and 5x10, in 3mm and 6mm; 4x8 3mm White/White is the most common sheet. Expect about 7 to 10 years outdoors. Our 3mm vs 6mm ACM guide covers which thickness to use.

AlumaCorr

Aluminum faces over a fluted polypropylene core. AlumaCorr gives a flatter, more rigid panel than corrugated plastic that holds up better outdoors over time, at a lower weight than ACM. Use it for real estate, directional and facility signs where weight matters.

Acrylic

Hard, glossy, rigid plastic sheet, also called plexiglass. Acrylic is the standard for illuminated channel letter faces, lightbox panels, backlit signs, displays and dimensional letters. White 7328 spreads LED light evenly across lit faces; clear suits covers and second-surface graphics. Acrylic sign sheets come in 1/8" and 3/16", stocked in clear and White 7328. Other colors can be ordered in.

Polycarbonate

A tougher clear or white plastic, sold under names like Lexan and TUFFAK. Choose polycarbonate sheets for low-mounted, high-traffic or vandal-prone signs and covers over printed graphics in public spaces. It is UV-stabilized to resist yellowing outdoors. See polycarbonate vs acrylic for the full comparison.

PVC Foam Board

Expanded PVC, often called Sintra. A light, rigid, closed-cell board with a matte face that prints and takes vinyl without priming. PVC sign board is the standard for indoor sign panels, dimensional letters, retail displays and trade show graphics, in 3mm to 25mm.

Styrene

High impact polystyrene (HIPS), a thin, low-cost sheet for interior signs, point-of-purchase displays and screen-printed signs. Styrene sheets come in .040 and .060; the .040 sheet scores and snaps with a utility knife. For outdoor durability, step up to polycarbonate, ACM or aluminum.

Magnetic Sheet

Flexible magnetic sheeting, .030" (30 mil) thick, for car magnets, removable vehicle signs, trade show and menu board signs, and promotional magnets. It sticks to any steel surface and comes off cleanly, so it suits signs that move or change. DigiMag printable magnetic sheet has a matte white face for eco-solvent, solvent, latex and UV printers, in 24" rolls from 1 ft to 50 ft. Magnum Magnetics magnetic sheet comes in 24" x 50 ft rolls for vinyl lettering, screen printing or digital print. Both work indoors and out.

Vinyl Banner

Flexible scrim vinyl for storefront, event and fence banners. Banners hang from grommets, fold or roll for storage and cover large areas at low cost. Pre-finished 14oz blank banners arrive hemmed and grommeted in standard sizes. For custom sizes, print on digital print banner media and finish with Fasnap #2 brass grommets.

Lettering and Graphics for Any Board

Every rigid material here takes adhesive vinyl. Oracal 651 is the standard for cut lettering on outdoor signs. Most of these boards also take direct digital print and screen printing without surface preparation.

Buying Sign Materials

We stock every material in this guide in Omaha and cut every substrate we sell to size. No wholesale account is needed. Full sheets ship by freight or Omaha pickup; call 1-800-999-3160 for a freight quote or cut sizes. Browse all sign substrates.

Sign Materials: FAQ

What is the best material for outdoor signs?

For signs that need to last years, pre-painted aluminum or ACM. For temporary outdoor signs such as yard and election signs, corrugated plastic. For outdoor signs that may take impact, polycarbonate.

What is the cheapest sign material?

Corrugated plastic is the lowest-cost outdoor material. Styrene is the lowest-cost rigid indoor material.

What are yard signs made of?

Most yard signs are 4mm corrugated plastic, usually 18x24, held up by wire H-stakes pushed into the flutes.

What material is used for sign boards?

It depends on the job. ACM and aluminum are the common outdoor sign boards, PVC foam board is the common indoor sign board, and acrylic is used for lit faces.

What is the most durable sign material?

For outdoor flat signs, aluminum and ACM are the long-term choices; ACM lasts about 7 to 10 years outdoors. Where a sign may be hit or vandalized, polycarbonate holds up best.

What material is used for car magnets?

Flexible magnetic sheet, usually .030" (30 mil) thick. Print it on an eco-solvent, solvent, latex or UV printer, or letter it with vinyl.

Can I use PVC or styrene outside?

Both are indoor materials. For outdoor signs, use aluminum, ACM, AlumaCorr, polycarbonate or corrugated plastic, depending on how long the sign needs to last.